Physics · JEE

Electrical energy and power, electrical resistivity and conductivity Mock Test for JEE

30+ syllabus-aligned questions available

Quick answer

A Electrical energy and power, electrical resistivity and conductivity JEE mock test on Goodmarks lets you attempt 30+ timed MCQs with instant feedback. Use it to benchmark speed, accuracy, and readiness for JEE Main Physics.

Simulate exam conditions with a Electrical energy and power, electrical resistivity and conductivity mock test. Attempt 30+ timed MCQs, check your score instantly, and review every solution to close gaps before the real exam.

Free sample questions

Attempt 15 free MCQs for Electrical energy and power, electrical resistivity and conductivity. Unlock 15+ more with Pro.

Unlock full bank
Q1PhysicsUnit 12: Current Electricity
In the circuit shown, the heat produced in 5Ω5 \Omega resistor is 10 calorie/sec. The heat produced/sec in 4Ω4 \Omega resistor will be :
Q2PhysicsUnit 12: Current Electricity
Q Type your question- and of fixed emf, the resistor R1\boldsymbol{R}_{1} has fixed resistance and the resistance of resistor R2\boldsymbol{R}_{2} can be varied (but R2\boldsymbol{R}_{2} is always nonzero). Then the electric power delivered to the resistor of resistance R1R_{1} is independent of the value of resistance R2\boldsymbol{R}_{2} Reason f potential difference across a fixed resistance is unchanged, the power delivered to the resistor remains constant.
Q3PhysicsUnit 12: Current Electricity
The most important safety method used for protecting home appliances from short circuiting or overloading is
Q4PhysicsUnit 12: Current Electricity
The electrical energy in kilowatt hours consumed in operating ten 50 W50 ~ W bulbs for 10 hrs/day in a month of 30 days is
Q5PhysicsUnit 12: Current Electricity
The Joules heating effect for an electric heater in A.CA . C and in D.C. circuit is
Q6PhysicsUnit 12: Current Electricity
The heat developed in a system is proportional to the current through it. Then
Q7PhysicsUnit 12: Current Electricity
A heater coil is cut into two equal parts and only one part is now used in the heater. The heat generated will now be:
Q8PhysicsUnit 12: Current Electricity
P=V2RP=\frac{V^{2}}{R} is applied when
Q9PhysicsUnit 12: Current Electricity
The lighting circuit is used for running:
Q10PhysicsUnit 12: Current Electricity
The value of resistivity of super conductor is
Q11PhysicsUnit 12: Current Electricity
Electrical power can be calculated by
Q12PhysicsUnit 12: Current Electricity
A wire 50cm50 \mathrm{cm} long and 1mm21 \mathrm{mm}^{2} in cross section carries a current of 4 A when connected to a 2 V battery. The resistivity of the wire is
Q13PhysicsUnit 12: Current Electricity
When a current flows through a conductor, its temperature
Q14PhysicsUnit 12: Current Electricity
Fuse blows because
Q15PhysicsUnit 12: Current Electricity
The power loss is less in transmission lines, when :

Want unlimited Electrical energy and power, electrical resistivity and conductivity practice?

Pro unlocks the full question bank, topic filters, and attempt history.

Frequently asked questions

How long should a Electrical energy and power, electrical resistivity and conductivity mock test take?

For a topic-level test, aim for 20–30 minutes. For a full subject mock, allow 60–90 minutes to mirror JEE timing.

What is a good score on a Electrical energy and power, electrical resistivity and conductivity mock test?

Aim for 70%+ accuracy initially, then push toward 85%+ as your exam date approaches. Review explanations for every wrong answer.

Does Goodmarks score mock tests automatically?

Yes. Each MCQ is scored instantly with the correct answer and explanation shown after submission.

Can I retake the same mock test?

Pro users can generate new question sets by topic. Reattempting the same questions after a gap is excellent for retention.